Thursday, February 22, 2007

New Master Cylinder

I've been pretty busy since my last post! Firstly I took all my drilled out brackets and a whole lot of other stuff to Lap-Tab in Birmingam and told them to sandblast and powdercoat them. They said it'd take a week but gave me a call a few days later and it was all done!


The credit card also took a beating this week at the online shop of Rally Design. I need new master cylinders for both the brakes and the clutch systems as the old ones were worn out. Thinking they'd be available relatively cheaply I checked at all the major suppliers and couldn't find one cheaper than about £60. I then heard of a company that can resleeve the inside of the cylinder (Past Parts) so I emailed them for a quote thinking this might be the cheapest way to sort it out. How wrong I was! The quote was exactly the same as a new cylinder!


So that left only one option really and that was to buy a Wilwood master cylinder from Rally Design. As this is only £30 it's both a cost and spec improvement over the standard stuff - which is a nice change from normal! I wasn't impressed by the postage charges on their website though - I don't think a flat rate of £8.50 is very good to be honest but they did get it sent out quickly.

I went for the Wilwood integrated reservoir cylinder and I will use it for my clutch as the capacity is pretty small and I would like a bit more 'in reserve' for my brakes. Club Triumph forum user '2litre-e' has a nice looking Wilwood cylinder with an external reservoir so I have posted on the forum inquiring about that!

1 comment:

Anonymous said...

I'd be interested to know how you get on with the Wilwood MCs. I bought a brake master from Rally Design a while back but when I came to fit it the angle of attacment was such that I would have only been able to put a dash of fluid in there. I didnt like the idea of having no 'reserve' fluid so fixed and refitted the Girling one. Hutch (from CT forum)